Pass-through bulkhead adapter.

• Minimum wall thickness: 1/2"
• Maximum wall thickness: 1-3/8"
• 2-7/8" overall length, 7/16" diameter - Stainless Steel
• Requires swivel nut washers, part# 843414

Pass-through bulkhead adapter.

• Minimum wall thickness: 1-1/4"
• Maximum wall thickness: 2-1/2"
• 4" overall length, 7/16" diameter - Stainless Steel
• Requires swivel nut washers, part# 843414

Shank for mounting beer faucets to a draft tower.

• 1/4" OD barb compatible with 3/16" and 1/4" ID tubing.
• Compatible with Intertap self closing spring.
• **NOT COMPATIBLE WITH PERLICK FAUCETS**
• Stainless Steel

Shank for mounting beer faucets.

• 5-1/8" overall length including barb.
• Maximum wall thickness: 2-1/2"
• Barb fits 3/16" ID tubing. Can be replaced with straight tailpiece if desired.
• Stainless Steel
• Works with Intertap self-closing spring.

Shank for mounting beer faucets.

• 4-1/4" overall length including barb, 3/16" bore
• Maximum wall thickness: 2-3/8"
• Integrated 1/4" OD hose barb connects directly to 3/16" ID or 1/4" ID beer line.
• Chrome-plated brass.

Shank for mounting beer faucets.

• 5-1/4" overall length including barb, 3/16" bore
• Maximum wall thickness: 3-3/8"
• Integrated 1/4" OD hose barb connects directly to 3/16" ID or 1/4" ID beer line.
• Chrome-plated brass.

Shank for mounting beer faucets.

• 2-1/8" overall length, 3/16" bore
• Maximum wall thickness: 5/8"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Chrome-plated Brass

Shank for mounting beer faucets.

• 3-1/8" overall length, 1/4" bore
• Maximum wall thickness: 1-5/8"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Stainless Steel

Shank for mounting beer faucets.

• 3-1/8" overall length, 3/16" bore
• Maximum wall thickness: 1-5/8"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Chrome-plated Brass

Shank for mounting beer faucets.

• 4-1/8" overall length, 3/16" bore
• Maximum wall thickness: 2-5/8"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Chrome-plated Brass

Shank for mounting beer faucets.

• 4-1/8" overall length, 1/4" bore
• Maximum wall thickness: 2-5/8"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Stainless Steel

Shank for mounting beer faucets.

• 6-1/8" overall length, 3/16" bore
• Maximum wall thickness: 4-5/8"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Chrome-plated Brass

Shank for mounting beer faucets.

• 6-1/8" overall length, 1/4" bore
• Maximum wall thickness: 4-5/8"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Stainless Steel

Shank for mounting beer faucets.

• 8-1/8" overall length, 1/4" bore
• Maximum wall thickness: 6-1/2"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Stainless Steel

Shank for mounting beer faucets.

• 10-1/8" overall length, 1/4" bore
• Maximum wall thickness: 8-1/2"
• Needs tail-piece, nut, and rubber washer to connect to beer line.
• Stainless Steel

Spanner wrench.

• Designed for tightening the connection between shanks and faucets.

Adapter for connecting a faucet to a keg coupler.

• 1/4" FFL, connects to 1/4" MFL pin-lock or ball-lock keg couplers.
• Also requires coupling nut, part# 843434

Coupling nut for shanks.

• Also works with the quick disconnect faucet adapter part# 843432

Replacement flange for shanks.

• Black Plastic.

Replacement flange for shanks.

• Stainless Steel.
• 1-7/8" diameter

Tailpiece for gas or liquid.

• Typically used to connect beer lines to shanks.
• 1/4" OD - Chrome-plated brass.
• Fits 1/4" ID and 3/16" ID line.

Tailpiece for gas or liquid.

• Typically used to connect beer lines to shanks.
• 1/4" OD - Stainless Steel.
• Fits 1/4" ID and 3/16" ID line.

Tailpiece for gas or liquid.

• Typically used to connect beer lines to shanks.
• 5/16" OD - Chrome-plated brass.

Tailpiece for gas or liquid.

• Typically used to connect beer lines to shanks.
• 5/16" OD - Stainless Steel.

Tailpiece for gas or liquid.

• Typically used to connect beer lines to shanks.
• 1/4" MFL - Requires swivel nut to connect to beer line.
• Requires a plastic washer, part# 843414.
• Stainless Steel.

90 Degree elbow tailpiece for gas or liquid.

• Ideal in faucet towers or other tight spaces.
• 1/4" OD - Stainless Steel.
• Fits 3/16" or 1/4" ID line.

Hex nut for beer line connections.

• Generally used on a shank with a tailpiece and washer.

Wing nut for beer line connections.

• Generally used on a shank with a tailpiece and washer.

Rubber washer for beer line connections.

• Generally used between shank and tailpiece.

Easy connection for Bev-seal Ultra beer tubing.

• Connects directly to a 1/4" MFL connection.
• Fits 5/16" OD tubing, including Bev-Seal Ultra tubing part# 843564

Easy connection for Bev-seal Ultra beer tubing.

• Connects directly to the back of standard beer shanks, includes rubber washer.
• Fits 5/16" OD tubing, including Bev-Seal Ultra tubing part# 843564

Right-angle connection for Bev-seal Ultra beer tubing.

• Stem end fits directly into another Push-In connector.
• Fits 5/16" OD tubing, including Bev-Seal Ultra tubing part# 843564