Can be used to split gas lines.

• 1/4" NPT, right-hand thread input and outputs.
• Generally used to split the low pressure output from a regulator.

Gas distributor for multi-keg systems.

• 1/4" barbed fittings - fits 1/4" ID line.
• Integrated check valves.
• Does NOT work with 5/16" ID tubing.

Gas distributor for multi-keg systems.

• 1/4" barbed fittings - fits 1/4" ID line.
• Integrated check valves.
• Does NOT work with 5/16" ID tubing.

Gas distributor for multi-keg systems.

• 1/4" barbed fittings - fits 1/4" ID line.
• Integrated check valves.
• Does NOT work with 5/16" ID tubing.

Splitter generally used for gas fittings.

• 1/4" OD barbs, works with 3/16" or 1/4" ID tubing.

Splitter generally used for gas fittings.

• 5/16" OD barbs, works with 5/16" ID tubing.

Gas distributor for multi-keg systems.

• MFL fittings - requires swivel nut (843412 or 843413) and washer (843414).
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas distributor for multi-keg systems.

• MFL fittings - requires swivel nut (843412 or 843413) and washer (843414).
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas distributor for multi-keg systems.

• MFL fittings - requires swivel nut (843412 or 843413) and washer (843414).
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas distributor for multi-keg systems.

• MFL fittings - requires swivel nut (843412 or 843413) and washer (843414).
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas distributor for multi-keg systems.

• 3/8" barbed fittings - fits 5/16" ID line.
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas distributor for multi-keg systems.

• 5/16" barbed fittings - fits 5/16" ID line.
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas distributor for multi-keg systems.

• 3/8" barbed fittings - fits 5/16" ID line.
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas distributor for multi-keg systems.

• 3/8" barbed fittings - fits 5/16" ID line.
• Integrated check valves.
• Capped MFL output allows for easy expansion.

Gas shut-off valve.

• Can be used with Brass Y-splitter (Part# 843471) to add an output to a regulator.
• 1/4" MFL fitting requires swivel nut and washer.
• Integrated check-valve.
• Right-hand thread.
• Requires a plastic washer, part# 843414.

Gas shut-off valve.

• Can be used with Brass Y-splitter (Part# 843471) to add an output to a regulator.
• 1/4" barbed fitting, fits 1/4" ID tubing.
• Integrated check-valve.
• Right-hand thread.

Gas shut-off valve.

• Can be used with Brass Y-splitter (Part# 843471) to add an output to a regulator.
• 3/8" barbed fitting, fits 5/16" ID tubing.
• Integrated check-valve.
• Right-hand thread.